User Manual

USB PT-104 User's Guide 9
Copyright © 2010 Pico Technology Ltd. All rights reserved. usbpt104.en
2.7
Setting up
Set up the USB PT-104 as follows:
1. From the File menu in PicoLog Recorder, select New settings. The Recording
dialog box appears:
2. Click OK. The Sampling Rate dialog box appears:
3. Click OK. The Converter details dialog box appears.
4. From the Converter type drop-down list, select either PT-104 (USB) or PT-104
(Ethernet). The dialog box will then show the converter list, as in the following
examples: