Specifications

Owners Manual
3
CONTACT US 858.546.5050
www.picomacom.com
PICO MACOM
PICO-PRO/Q
Introduction
Thank you for purchasing the PICO-PRO/Q Digital Signal Level Meter. We are sure that with proper use and care you
will be very satisfied with your new test equipment. To ensure safe operation of this instrument, be sure to follow the
warnings and precautions provided below.
Warning
• Do not use, place or store the meter where it may be exposed to rain, moisture or high humidity, as moisture can
damage internal components.
• Do not place or store meter where it may be exposed to continuous direct sunlight, as this may damage the
display, keypad, casing or internal components.
• Do not expose the meter in an environment of excessive heat.
• Do not drop, bump, cause impact or use the meter in a rough or careless manner, as this may void your warranty.
Caution
• When operating this meter, use caution if voltage is present on the cable under test.
• This product is not waterproof.
• Do not connect this meter to any circuit that exceeds the maximum power rating.
• To avoid shock or electrocution, always ensure the circuit under test is properly grounded.
• Do not attempt to repair, modify or change the meter battery.
• Do not use a battery charger other than the one provided for charging the internal rechargeable battery.
• Opening the case for any reason will void your warranty and could cause an electrical shock or equipment
damage.
• Do not operate the meter if dropped or the casing has been damaged.
If needed, contact PICO MACOM, INC. for service or repair.
PICO MACOM, INC.
6260 Sequence Drive, Suite 110
San Diego, CA 92121
Ph: 858-546-5050
Fax: [phone]