Specifications

12
CONTACT US TOLL FREE 800-421-6511
www.picomacom.com
PICO MACOM
Owners Manual
PICO-PRO/Q
Automatical Measurement
Select the “AUTO” icon and press the Enter Key to enter the automatical
measurement mode.
The Function Key Icons’ Definition:

: Edit

: Delete

: Start

: Return
Press F1 to enter the auto project setting screen (Fig. 16), which contains the
file name and five channels. Press the Up Key and Down Key to change the
pointer. Left Key and Right Key to change the channel number. Input the name
of the file by the Number Keys. Select “save & return” and press the Enter Key.
Press F2 to delete the selected auto project.
Press F3 to start measuring the five channels in the selected auto project.
Press F4 to return.
Spectrum Measurement
Select the “SPECT” icon and press the Enter Key to enter the spectrum
measurement mode. (Fig. 17)
The Function Key Icons’ Definition:
: Zoom In (Change BW)
: Zoom Out (Change BW)
: Save
: Zoom In (Change Scale)
: Zoom Out (Change Scale)
: Page Down
: Page Up
: Return
1. Step Adjusting
Press F1 (

) or F2 (

) to zoom in or out.
The step available: 10KHz, 20KHz, 30KHz, 50KHz,100KHz, 500KHz.
2. Scale Adjusting
Press F4 to switch the Function Key to the next page. Then press F1 (

) and
F2 (

) to change the scale among 20, 10, 5, 2, 1 db/div.
3. Spectrum Central Frequency Input
Press the Numbers Keys and the MHz Key. The device will start the spectrum
measurement with the new spectrum center frequency.
4. Level Reference Adjusting
The level reference displays at the bottom of the right side. It can be adjusted by pressing Up and Down Key.
The step of level reference is 5dB.
Fig. 16


Fig. 17







