PLM860SAW Manual.qxd 7/31/03 2:27 PM Page 1 PLM860SAW 860MHz Channelized-Agile PLL Saw-Filtered A/V Modulator Installation and Operation Manual Ph: 800-421-6511 www.picomacom.com Operation Manual Rev.
PLM860SAW Manual.qxd 7/31/03 2:27 PM Page 2 Safeguards PLM860SAW Product Inspection Inspect the equipment for shipping damage. Should any damage be discovered, immediately file a claim with the carrier. Important Safety Instructions To insure proper installation and operation, take a moment to read this guide before proceeding with the installation.
PLM860SAW Manual.qxd 7/31/03 2:27 PM Page 3 Safeguards PLM860SAW 11. Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company. 12. Power-cord Protection: Power-supply cords should be routed so they are not likely to be walked on or pinched by items placed upon or against them.
PLM860SAW Manual.
PLM860SAW Manual.
PLM860SAW Manual.qxd 7/31/03 2:28 PM Page 6 Operation and Controls PLM860SAW 1 2 4 3 5 6 PLM860SAW 860MHz Channelized-Agile PLL SAW-Filtered A/V Modulator POWER TEST POINT RF OUTPUT LEVEL AUDIO MODULATION AURAL LEVEL VIDEO MODULATION CH-30dB Front Panel Control 1. Power Indicator: The LED indicates unit is operating. 4. Audio Modulation: This control is used to set the audio modulation level. 2.
PLM860SAW Manual.qxd 7/31/03 2:28 PM Page 7 Installation Procedure PLM860SAW Installation Signal Combining Methods It is recommended that assistance be available to safely install equipment in equipment racks. PICO MACOM recommends connecting the headend components in the following manner: Each of the modulators, signal processors or strip amplifiers output are connected to a combining network. Either a PHC-12G or a PHC-24G headend combiner may be used to accomplish this purpose.
PLM860SAW Manual.qxd 7/31/03 2:28 PM Page 8 Warranty PLM860SAW Limited Warranty Pico Macom warrants to the original purchaser that all of its new products are of sound design, quality materials and workmanship at the time of manufacture and will be free from related defects for one year from the original purchase date.
