PICO MACOM PFAM-550SUB NTSC Frequency Agile Audio and Video Modulator Installation And Operation Owners Manual Please read this manual thoroughly before use. Keep this manual handy for future reference. Visit Our Web-Site www.picomacom.com Contact Us 858.546.5050 Toll Free 800.421.
PICO MACOM Safeguard Important Information Product Inspection Inspect the equipment for shipping damage. Should any damage be discovered, immediately file a claim with the carrier. Important Safety Instructions To insure proper installation and operation, take a moment to read this guide before proceeding with the installation.
PICO MACOM EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL ELECTRICAL CODE INSTRUCTIONS CONTAINED IN ARTICLE 810 - "RADIO AND TELEVISION EQUIPMENT" Important Information 10. Grounding or Polarization - This video product is equipped with either a three prong plug for 110 VAC use or a two prong flat blade 220 volt type plug. Each type is to be inserted into only the type of receptacle for which they are specifically designed.
PICO MACOM DESCRIPTIONs Specifications Features • • • • Double heterodyne conversion provides superior spurious harmonic output supression Channels T7 through 78 capable (5.75 to 550MHz) 57 ±3 dB output, 5.75 to 550 MHz SAW filtered and I.F.
PICO MACOM Panels Front and Rear Panels Front and Rear Panels 1 PFAM 550SUB 2 3 4 5 6 7 8 9 550MHz Sub-Band Extended Agile A/V/ Modulator VIDEO AUDIO RATIO POWER AUDIO OVER MOD AUDIO MOD VIDEO VIDEO OVER MOD MOD TEST POINT CHANNEL RF LEVEL R RF OUT -30 dB IF IN IF OUT VIDEO IN 250 VAC 0.5A AUDIO IN SUB 600VA MAX 117VAC 60 Hz 20 W 17 18 CATV FUSE 10 11 12 13 14 15 16 1. Power on LED: Indicates power is on when lit. 11. I.F. Input: Input from I.F. scrambler or I.F.
PICO MACOM InstaLlation Installation Procedures Adherence to these precautions will help prevent problems during initial installation of the PFAM 550SUB. 1. Connect the I.F. jumper from the I.F. output to the I.F. input on the rear panel. 2. Connect the PFAM 550SUB to a 115 VAC grounded receptacle. Observe the lit LED light indicating power is on. 3. Using a signal level meter or spectrum analyzer, set the output level. 4. Check the aural carrier level. It should be set at 15 dBmV below the video carrier.
PICO MACOM InstalLation PFAM 550SUB 2-Way Application LHCP RHCP AUDIO IN RF OUT DSS RECEIVER PFAM550mt RF OUT RF IN VIDEO IN AUDIO IN DSS RECEIVER PFAM550mt RF OUT RF IN VIDEO IN AUDIO IN DSS RECEIVER PFAM550mt RF OUT RF IN VIDEO IN AUDIO IN DSS RECEIVER RF OUT RF IN VIDEO IN AUDIO IN PFAM550mt DSS RECEIVER PFAM550mt RF OUT RF IN VIDEO IN AUDIO IN DSS RECEIVER PFAM550mt RF OUT RF IN VIDEO IN AUDIO IN DSS RECEIVER PFAM550mt RF OUT RF IN VIDEO IN AUDIO IN DSS RECEIVER
PICO MACOM CHANNEL SELECTION DIP Switch Settings - Standard 1 ON -0 OFF -1 CHANNEL STD. EIA thru 10 Example: Adjacent DIP switch drawing illustrates the proper setting for channel 2. ON 1 2 3 4 5 6 7 8 910 VIDEO FREQ. MHz OFFSET CH. VIDEO FREQ. MHz OSC. FREQ. MHz S1 1 2 3 4 5 6 7 8 9 10 2 2 5 5.25 1014 0 1 0 0 0 0 0 0 0 0 3 3 6 1.25 1020 1 1 0 0 0 0 0 0 0 0 4 4 6 7.25 1026 0 0 1 0 0 0 0 0 0 0 5 5 7 7.25 1036 1 0 1 0 0 0 0 0 0 0 6 6 8 3.
PICO MACOM CHANNEL SELECTION DIP Switch Settings - Standard CHANNEL STD. EIA VIDEO FREQ. MHz OFFSET CH. VIDEO FREQ. MHz S1 OSC. FREQ.
PICO MACOM CHANNEL SELECTION DIP Switch Settings - Standard CHANNEL STD. EIA VIDEO FREQ. MHz OFFSET CH. VIDEO FREQ. MHz OSC. FREQ. MHz S1 1 2 3 4 5 6 7 8 9 10 XX 60 439.25 1 3 98 0 0 1 1 1 1 0 0 0 0 YY 61 445.25 1 4 04 1 0 1 1 1 1 0 0 0 0 ZZ 62 451.25 1 4 10 0 1 1 1 1 1 0 0 0 0 AAA 63 457.25 1 4 16 1 1 1 1 1 1 0 0 0 0 BBB 64 463.25 1 4 22 0 0 0 0 0 0 1 0 0 0 CCC 65 469.25 1 4 28 1 0 0 0 0 0 1 0 0 0 DDD 66 475.
PICO MACOM Warranty WARRANTY Five Year Limited Warranty* Limited Warranty Pico Macom warrants to the original purchaser that all of its new products are of sound design, quality materials and workmanship at the time of manufacture and will be free from related defects for one year from the original purchase date.
PICO MACOM 6260 Sequence Drive San Diego California 92121 Phone: 858.546.5050 Sales: 858.546.5055 Fax: 858.546.5051 www.picomacom.com sales@picomacom.com Printed in the U.S.A.
