V: 2.1 Tru Spec ™ ® PICO MACOM INC, U.S.A. CAM-35UNIV NTSC AUDIO/VIDEO MODULATOR Installation And Operation Manual Doc. No. OM2032N-2 REV.A Date: 4/4/99 PICO MACOM INC. 12500 Foothill Blvd.
SAFEGUARDS Importent Information Product Inspection Inspect the equipment for shipping damage. Should any damage be discovered, immediately file a claim with the carrier. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING–FOR INDOOR USE ONLY. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Important Safety Instructions To insure proper installation and operation, take a moment to read this guide before proceeding with the installation.
SAFEGUARDS Importent Information con't EXAMPLE OF ANTENNA GROUNDING ACCORDING TO 10. Grounding or Polarization - This video product is equipped with a polarized alternating - current line plug (a plug having one blade wider than the other). This plug will fit into the power socket only one way. This is a safety feature. If you are unable to insert the plug full into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
DESCRIPTION and Specifications CAM-35UNIV Consumer Agile Modulator u • pec CAM-35UNIV ™ ® PICO MACOM INC., U.S.A. OFFSET CH. MODE CHANNEL CATV/TV Features • Excellent picture quality • Low spurious harmonic output • Microprocessor controlled PLL with user selectable output channel • HRC and IRC offset capable.
PANELS Front & Rear Panels 25kHz 1 1.25kHz 2 3 4 5 u • pec CAM-35UNIV Front Panel ™ ® PICO MACOM INC. OFFSET CH MODE CHANNEL CATV/TV STD HRC IRC 6 7 8 9 10 11 12 VIDEO IN RF OUT Rear Panel AC120V 60Hz 15W DIP. OFF ON R AUDIO IN L/B.B. + L B.B. + Bottom Panel CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! VIDEO ADJUST B.B. ADJUST + + 13 1. Offset: Selects 12.5 or 25 kHz offset. 2. Ch. Mode: Selects Standard, HRC or IRC frequencies.
I N S TA L L AT I O N Installation Procedures 1. Electrical Connection: Plug the power cord into 120 Vac, 60Hz electrical outlet. camcorder or surveillance camera to an ultraband CATV channel or a standard UHF channel. 2. Video and Audio Input Connections: a. Slide the rear display switch to the ON position. This switch activates and deactivates the digital display and the channel selector buttons on the front panel. b.
I N S TA L L AT I O N Stereo Hook-Up Note: To obtain stereo sound the CAM-35UNIV must be used with a stereo encoder. The method of installation is shown below. RF OUT (TO DISTRIBUTION SYSTEM) VIDEO IN BASE BAND SELECT SWITCH AUDIO IN AC120V 60Hz 15W CAM-35UNIV CAM-35U/U DISPLAY OFF ON R AUDIO IN L/B.B. VIDEO OUT L B.B.
WARRANTY ONE YEAR LIMITED WARRANTY P ico Macom, Inc. warrants to the original purchaser this product shall be free of defects in material and craftsmanship with only the limitations or exclusions set out below. During the warranty period Pico Macom, Inc. or an authorized Pico Macom service facility will provide, free of charge, the parts and labor necessary to correct defects in material and workmanship.
NOTES PICO MACOM INC. 12500 Foothill Blvd.
NOTES PICO MACOM INC. 12500 Foothill Blvd.
NOTES PICO MACOM INC. 12500 Foothill Blvd.
Tru Spec ™ ® PICO MACOM INC, U.S.A. PICO MACOM INC. 12500 Foothill Blvd.