User's Manual

DO114-2 29.11.05 JB
PicoScope 2000 series specifications
For more information
You can find the latest detailed instructions for installing and using the PicoScope
2000 Series PC Oscilloscopes and PicoScope software on our web site at
www.picotech.com/download.html. You can also find copies of the manuals on your
Pico Software CD – press the “User Manuals” button, then select the model number of
your oscilloscope or “PicoScope” for the software manual.
You can contact our technical support
team at the address below.
PicoScope 2202
Resolution 8 bits
Channels 2
Voltage ranges ±50 mV to ±20 V
Bandwidth 2 MHz
Spectrum ranges DC to 2 MHz
Sampling rate 20 MS/s
Buffer size 32 ksamples
PC connection USB 2.0 (USB 1.1 compatible)
Scope timebases 500 ns/div to 50 s/div
Timebase accuracy 100 ppm
Dynamic range 48 dB
Trigger modes Free Run, Auto, Repeat, Single and Save To Disk On Trigger
Pre/post trigger -100% to +100%
Voltage accuracy ±3%
Input impedance 1 MΩ
Power supply from USB port
Pico Technology Ltd
The Mill House
Cambridge Street
St Neots
Cambridgeshire
PE19 1QB
United Kingdom
Tel: +44 (0) 1480 396 395
Fax: +44 (0) 1480 396 296
Email: tech@picotech.com
Web:
www.picotech.com
DO114-2 29.11.05 JB
PicoScope
®
2000 Series
Quick Start Guide

Summary of content (2 pages)