User Manual

WPS600 User’s Guide Pico Technology
6 DO187-4
3. The parts of your WPS600 pressure transducer
Signal output
Use the BNC-to-BNC cable supplied to connect this to your
oscilloscope.
CAUTION
This connector is made of plastic to ensure
electrical safety. It could be damaged by a
strong impact.
Front-panel controls
See Section 4.
USB charging port
For battery recharging only (no data connection). Connect
to any USB port on a computer or wall charger.
Inlet port
Connect the pressure hose here.
Re-ordering codes
If you need to re-order spare parts, please use the part numbers listed below.
WPS600 pressure transducer kit (PP833)
Part No
Qty
Description
TA092
1
WPS600 pressure transducer
TA081
1
USB to mini-USB charging cable 2 m
MI030
1
BNC to BNC cable 1 m
DO187
1
WPS600 User’s Guide
PA041
1
Carrying case
Signal output
to oscilloscope
Inlet
port
Front-panel controls
USB charging
port