Brochure

PicoScope 4444
High-resolution differential oscilloscope
With four true differential inputs, 12 or 14-bit resolution and wide differential and common-mode voltage ranges, the
PicoScope 4444 and its accessories offer accurate and detailed measurement for a multitude of applications, from low-
amplitude biomedical and electronic uses to 1000 V CAT III design and test.
• 4 true differential high-impedance inputs
• 20 MHz bandwidth
• FlexRes 12 or 14-bit resolution
• 256 MS capture memory
PicoScope 4224 and 4424
• 2 or 4 channels
• 12-bit resolution
• IEPE model available (for
accelerometers, microphones etc)
• 20 MHz bandwidth
• 32 MS capture memory
• Decode 16 serial protocols as standard
• USB connected and powered
High resolution oscilloscopes
The PicoScope 4224 and 4424 offer both high resolution (12 bits) and high DC accuracy (1%) making them an excellent
choice for noise, vibration, precision electronics and mechanical analysis.
The optional IEPE model has built-in constant current sources that allow the direct connection and powering of industry
standard accelerometers and microphones.
PicoScope 4262
Digital oscilloscope for the analog world
Most digital oscilloscopes have been designed for viewing fast
digital signals. The trend has been to use new technology solely to
increase sampling rate and bandwidth. With the PicoScope 4262,
however, we have focused on what’s important for measuring
analog signals: increasing the resolution, improving dynamic
range, and reducing noise and distortion.
The result is an oscilloscope / FFT analyzer that has a level of
performance to put most audio analyzers to shame. It has a 5 MHz
bandwidth making it equally suitable for vibration and ultrasound
signals as well as a wide range of precision measurement tasks.
The PicoScope 4262 has a built-in 20 kHz function generator (sine,
square, triangle, DC voltage, ramp, sinc, Gaussian, half-sine, white
noise and PRBS). The function generator offers an outstanding
sine wave distortion performance of 102 dB SFDR.
The scope’s 9-pin D-type connectors create an intelligent true
differential probe interface and allow the PicoScope software
to automatically identify the probe and select the appropriate
display settings. These Pico D9 connectors also mean that
probes that would usually require battery packs or power
supplies can draw their power through the scope device instead.
Intelligent probe interface
550 uV
3 phase power test Power inverter test
Ripple&Noise
Biological (heartbeat) test
Low voltage 1:1 probe 1000 V CAT III probe 40 A Current probe D9 to BNC D9 to dual BNC
• 2 channel oscilloscope /
spectrum analyzer
• 16-bit resolution
• Low distortion (96 dB SFDR)
• Low noise (8.5 µV RMS)
• 5 MHz bandwidth
• 16 MS capture memory
• Low-distortion signal
generator
• Arbitrary waveform
generator
• USB connected and
powered
PP799 PicoScope 4262 Includes probes 2 channel + external trigger $1235 €1045 £859
PP478 PicoScope 4224 Includes probes and carry case 2 channels $859 €729 £599
PP695 PicoScope 4224 IEPE Scope only 2 channels $989 €839 £679
PP479 PicoScope 4424 Includes probes and carry case 4 channels $1365 €1165 £949
PQ073 PicoScope 4444 standard low voltage kit $1535 €1325 £1075
PQ074 PicoScope 4444 1000 V CAT III kit $1915 €1625 £1345
www.picotech.com