Instructions for use

16
JOKER XL Instruction Manual
Mark point.
Secure.
Secure.
Rudder servo install as same as method of
elevator servo. See picture below:
RUDDER SERVO INSTALLATION.
Rudder servo.
3x 12mm
Left side
1) Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket should
be centered on the plywood plate.
MOUNTING THE TAIL WHEEL
BRACKET.
Bottom side.
3 x 12mm
Push in to.