Instructions for use

12
JOKER XL Instruction Manual
4. Assemble and mounting the wheel pants
as shown in the following pictures.
5. A drop of C/A glue on the wheel collar
screws will help keep them from coming lose
during operation.
Repeat the process for the other wheel.
Secure.
Bottom side.
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the servo
into the servo tray.
2. Mount the servo to the tray using the
mounting screws provided with your radio sys-
tem.
5x 35mm
elevator
servo
SERVO INSTALLATION.
ELEVATOR INSTALLATION.
Bottom side.