Instructions for use

A
B
CA
Tail gear
BOTTOM - VIEW
Unteransicht
Cut away only
the covering
2A
Insert the Z bend into the control horn.
Push the foot of control horn into the slot
on the elevator as shown.
Slide the elevator push-rod (in the hard-ware bag)
into the white nylon push-rod guider.
White nylon push-rod
guider
CA
Thin CA
Securely glue together. If coming
off during flight, you lose control
of your air plane.
Fuhren Sie die Verklebungen mit gro ter
Sorgfalt aus.
Attach the Vertical Stabilizer
Incorrect
Correct
Check the alignment of the vertical
stabilizer.The distance must be equal on
both sides. If not, adjust the stabilizer until
the measurements are the same.
A
A’
A=A’
A
A’
A=A’
2
2B
2C
2A
2B
2C
2D
2D
Secure the control horn in place using
thin CA glue.
2E
2F