Instructions for use

19
PZL-104 Wilga - Item code: BH 124 . Instruction Manual
Bottom side.
Mark point
Drill a hole
2.5mm diameter
Top
side.
3 x 12mm
Secure.
 4. Install the muffler and muffler exten-
sion onto the engine and make the cutout in
the cowl for muffler clearance. Connect the
fuel and pressure lines to the carburetor, muf-
fler and fuel filler valve.
 3. Slide the cowl back over the engine
and secure it in place using three screws. See
picture below.
Machine screw.
Front view
Downloaded from www.Manualslib.com manuals search engine