Instructions for use

! Engine thrust on fire-wall
is already adjust at factory
FRONT-VIEW
- Remove the engine mount and drill a 13/64”
(5mm) hole through the fire-wall at each of the
four marks marked.
- Using a pencil or felt tipped pen, mark the
fire wall where the four holes are to be drilled
- Reposition the engine mounts on to the
fire-wall.
Secure them with four 4x25mm bolts
and blind-nuts.
! Align the mark on both mounts
with the mark on the fuselage
Pull the magnetic top hatch
out of the fuselage.
B
B’
B=B’
5mm
13/64”
...4
.................4
4x25mm bolt
Blind-nut
5/32x1”
ZLIN Z-526
10- Engine