Instructions for use

23
FIESELER Fi156C STORCH - ITEM CODE: BH99. Instruction Manual
*** Test fit the aluminium tube dihedral brace
into each wing haft. The brace should slide in
easily. If not, use 220 grit sand around the
edges and ends of the brace until it fits prop-
erly.
Locate the aluminium wing dihedral brace.

1) Cut out the switch hole using a modeling
knife. Use a 2mm drill bit and drill out the two
mounting holes through the fuselage side.

2) Secure the switch in place using the
two machine screws provided with the radio
system.
Switch.
INSTALLING THE SWITCH.
UBEC
Receiver
Tie wrap.
WING ATTACHMENT.
890 mm
19
12
 4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
12
19
Right wing.
Left wing.