Contents Chapter I. Precautions for Safe 1 Chapter II. Parts and mm 4 Chapter ITI. Method of Chapter IV. How to Chapter V. Tips for Ingredient 11 Chapter VI. 14 Chapter VII.
Chapter I. Precautions for Safe Operation Read these precaution tips carefully before using this product: 1 Power of 110-130V/ 60Hz shall be supplied to this product. Please confirm your power supply before use. Be sure to disconnect the power supply before assembly or adjustment to this product. In case of any damage to the flexible wire, to avoid any hazard, contact our customer service or send it to our authorized service center for replacement, and do not try to disassemble it without our authorization.
The juice strainer, end cap, or auger may be dyed by the juice during operation, which is a normal phenomenon and has no effect on edibility and does no harm to health. This product is equipped with intelligent protection chips, making it stop automatically for every 20 minutes’ operation. And in such case, rest it for 20-30 minutes before restarting cool the motor down and prolong product service life, This product is designed to limit the flow rate.
Do not use any steel wool, abrasive cleaning agent or corrosive liquid such as gasoline or acetone to clean this product. This product should be stored in a place that children can’t reach, Do not allow persons with unsound extremities and sensation or mental disorders and persons who are short of related experience and knowledge(including children) to use or play with this product. This product is meant for individual or family use only.
Chapter IL Parts and Functions No. Component Function Description ame @ wore For connection to power supply. The main unit containing the motor and @ Housing other components, providing power output. On-Off For control of product operation, such as Pi pear © Switch forward/backward rotation and close-down. For locking of the juicing drum to prevent unexpected [Locking release out of the housing, To unload the juicing drum ® Button off the housing, press down and hold this button.
One of the main components to extract juice, where the @ [icing Drum| food material is loaded from the chute at the top, while the juice and pomade are discharged from the outlet. One of the main components to extract juice, where the @ | Auger food material is transferred and ground against the juice strainer or extrude.
Chapter IV. How to Assemble Connect Drum @with Housing @: Connect the drum @with the housing Sby aligning the “V ” on the feed chute @with “sf” on the housing @. Push the drum hard and rotate the drum counter-clockwise until it aligns the “ ¥” on the feed chute © with an the housing (You will hear “tick” sound to confirm you have fastened it tightly and correctly.) 2 Place the auger GD into the drum Insert the juice strainer @ into the drum @.
Place the end cap @ onto the drum @end and rotate the cap counter-clockwise. Place juice container ®and the pomade container under the drum set . Mount tray onto the upper end of the feed chute ©. Connect to power supply and get ready for startup. (Before the power is on, make sure the switch is in the off position.
Clean the material and cut it into small pieces that can pass through the feed chute, and place them onto the tray. Note: Any hard core, seed, skin or shell from fruits and vegetables should be removed in advance. Rotate to the “SOFT” or “HARD” key switch to start. Note: Keep the machine operating for less than 10 minutes. Long time use will destroy the motor. Note: Do not touch the power switch with wet hands to avoid electric shock, leakage or fire.
11 Upon completion, shut down the switch when no juice is flowing out of the outlet and disconnect the power supply. Do not remove the juice container until the spiral propeller and juice strainer have stopped rotating completely. The extracted juice should be drunk as soon as possible as it will have degraded taste and nutrient content if exposed to the air for a time.
Chapter V. Tips for Ingredient Selection * FRUIT Efficiently juicing hard and soft fruits with this juicer. Jam cannot be achieved, some fruit cannot squeeze juice (such as bananas, mangoes, dried fruit, sugar cane, etc.). * VEGETABLE Cut vegetables into strips (less than 4 inches).
2. Thick skin on fruits such as orange, pineapple and raw beet root instead of thin skin on fruit/vegetable needs to be removed. Seeds in oranges should be removed as well, which may make the juice taste a little bitter. 3. Concentration of juice extracted from apple depends on what type of apple is selected. So select the proper type of apple depending on your desired juice concentration. 4 Just extracted apple juice will turn brown very soon, and this process can be slowed by adding drops of lemon juice.
80 gram = 55 KJ(7 calorie) Celery Vitamin C and potassium Cucumber Vitamin C 280 calorie) Fennel Vitamin C and dietary fiber 300 calorie) Grape Vitamins Can B6, and potassium | 125 calorie) Yaobang Vitamin C and potassium 100 gram = 100KJ(40 calorie) Vitamins C and A, folic acid and Muskmelon | 200 caloric) dietary fiber Vitamins C and B3, potassium and Nectarine 180 calorie) dietary fiber Vitamins Can B3, potassium and Peach | 150 caloric) dietary fiber Pear Dietary fiber 150 caloric) Pineapple Vitamin C 1
3 Chapter VI. Maintenance Before cleaning this product, be sure to shut off the switch to disconnect the power supply. Clean this product after using it. The housing cannot be washed under water, and must be cleaned with a wet cloth instead. Before storing it, make sure this product is clean and dry. Disassemble this product to wash the components by the following steps: 1 | First, remove the pushing rod and tray. Press down and hold the locking 5 | button @, and rotate the drum clockwise to remove it.
After removing the juicing drum, 3 | detach the end cap, juice strainer and auger. All removable components can be washed with water. WARNING Do not immerse the motor base in water or any other liquid. Do not use water jet to clean the motor base. Chapter VIL Trouble Shooting Fault Analysis of cause Fault resolution Phenomenon After 1. After turning on the Re-pushing rod it properly. connecting machine, wait for 1s; it power supply | will work. It is normal. L Replace the socket and turning on | 2.
If this phenomena During the early] occurs frequently, send uses, the motor normal it to an authorized generates an phenomenon. service center nearest to unpleasant you for inspection. smell. 1. Check whether the 1.Too low voltage. voltage is too low. This 2. Excessive amount 2. Disconnect the machine of food material has power supply and stops been loaded. Remove excessive during 3.The machine has food material. operation. operated continuously 3.1t is a normal for a long time.
Chapter VIII.
Pic berm For a better household appliance For more information, Please visit our website at www. motherliness.
