User's Manual
13
Press and Hold
Blinking RED
Hold for >15 seconds
Blinking RED
Trapmate Shut-Down Operation:
When the Trapmate is not going to be used for more than a few weeks it should be powered down to conserve
battery life.
Step 1: Power OFF the Trapmate by pressing and holding the function button; release when the RED LED starts
blinking. The unit will continue to power OFF by ashing the RED LED ve times.
Step 2: During the power down process (while the LED is blinking RED) the unit will send an alert to make sure
that the registered owner of the device is notied the Skyhawk Trapmate is going o-line.
Release
Trapmate Reset Operation:
The Trapmate has the ability to be reset back to default settings.
Step 1: Press and HOLD the button for more than 15 seconds.
Step 2: The LED will begin to rapidly blink RED, release button.