User's Manual

Press and Hold

Blinking GREEN

Acknowledgement

SUCCESS

Trapmate Start-Up Operation:

Before moving forward with the unit operation you must download the Skyhawk CE app onto your smart device

and sign up for an account.

Step 1: Download and install the Skyhawk CE app from the Apple or Google Play store onto your compatible

smart device. Go to sky-hawk.com for more detailed information on which devices are supported.

Step 2: Power ON the Trapmate by pressing and holding the function button; release when the GREEN LED starts

blinking. The unit will continue to power ON by ashing the GREEN LED ve times.

Step 3: After the unit is powered up, it will automatically send a power ON alert to the Skyhawk HUB that will in

turn send an acknowledgement back to the Trapmate. The acknowledgment on the Trapmate will be indicated by

a rapid ashing GREEN LED for 5 seconds. Additionally, the sensor status information is sent to the Skyhawk CE

app via the cellular network. This initial trigger can take a minute or two and will verify connectivity between all

the parts in the system. If the acknowledgement is a rapid ashing RED LED for 5 seconds, then the sensor could

be out-of-range from the HUB. If out of range power OFF the device then go back to Step 2.

Release

Rapid ashing GREEN for 5s

Step 4: The unit now automatically goes into armed mode. Whenever the unit is moved beyond the set sensitivity

or the reed switch is activated by a magnet pull from the holder, then it will be triggered. This triggered information

is sent to the Skyhawk CE application via the Skyhawk HUB’s cellular connection. When the unit is triggered the

LED will blink GREEN twice.

Step 5: Unit returns to sleep and has a 60 second back-o until the unit can be triggered again.

Rapid ashing RED for 5s

Acknowledgement

FAILURE