User's Manual

Trapmate Mini Start-Up Operation:

Before moving forward with the unit operation you must download the Skyhawk CE app onto your smart device

and sign up for an account.

Step 1: Download and install the Skyhawk CE app from the Apple or Google Play store onto your compatible

smart device. Go to sky-hawk.com for more detailed information on which devices are supported.

Step 2: Power ON the Trapmate Mini by pressing and holding the function button; release when the GREEN LED

starts blinking. The unit will continue to power ON by ashing the GREEN LED ve times.

Step 3: After unit is powered up, it will automatically send a power ON alert to the Skyhawk HUB that will in

turn send an acknowledgement back to the Trapmate Mini. The acknowledgment on the Trapmate Mini will be

indicated by a rapid ashing GREEN LED for 5 seconds. Additionally, the sensor status information is sent to the

Skyhawk CE app via the cellular network. This initial trigger can take a minute or two and will verify connectivity

between all the parts in the system. If the acknowledgement is a rapid ashing RED LED for 5 seconds, then the

sensor could be out-of-range from the HUB. If out of range power OFF the device then go back to Step 2.

Press and Hold

Blinking GREEN

Release

Acknowledgement

SUCCESS

Rapid ashing GREEN for 5s Rapid ashing RED for 5s

Acknowledgement

FAILURE

Step 4: The unit now automatically goes into armed mode. Whenever the unit is moved beyond the set sensitivity

or the reed switch is activated by a magnet pull from the holder, then it will be triggered. This triggered information

is sent to the Skyhawk CE application via the Skyhawk HUB’s cellular connection. When the unit is triggered the

LED will blink GREEN twice.

Step 5: Unit returns to sleep and has a 60 second back-o until the unit can be triggered again.