User's Manual
14
Skyhawk Trapmate Mini Shut-Down Operation:
When the Skyhawk Trapmate Mini is not going to be used for an extended period of time (more than a few weeks)
to monitor an object then it should be powered down to conserve battery life.
Step 1: Remove battery cover, as shown in previous section (pages 10 & 11).
Step 2: During the power down process (while the LED is blinking RED) the unit will send an alert to make sure
that the registered owner of the device is notied the Skyhawk Trapmate Mini is going o-line.
Skyhawk Trapmate Mini Reset Operation:
The Skyhawk Trapmate Mini has the ability to have the unit reset back to default settings.
Step 1: Press and HOLD the button for more than 15 seconds
Step 2: The LED will begin to rapidly blink RED (for about 5 seconds) while the reset is being performed.
Press Twice within
3 seconds
Blinking RED
Hold for >15 seconds
Blinking RED