User's Manual

Hub Installation (continued):

Method 3 : Self-Stick Rubber Mounting Feet (if included)

Step 1: In the accessory kit, locate the four self-stick rubber mounting feet.

Step 2: Clean the four circular recessed areas on the back of the

Hub with 70% isopropyl alcohol for proper

bonding of the feet.

Step 3: Peel back the paper on the rubber feet to expose the adhesive and ax them to the designated areas on

the back of the unit.

Step 4: The Hub is ready to be mounted. Place the Skyhawk on a at surface, such as a table or shelf.