User's Manual
Hub LED Indicators:
The Hub is equipped with a multi-color LED indicator for feedback status to the user.
Below is a chart of the status indicators:
Status LED
Power Up ---------------------------------------- > Blink GREEN LED for about 30 seconds
Power Down ------------------------------------ > Blink RED LED for about 30 seconds
Receive RF trigger from sensor ------------- > Blink GREEN LED twice
Reset ---------------------------------------------- > Blink RED LED for about 30 seconds
Format -------------------------------------------- > Blink RED to BLUE to GREEN cycle until completed
Firmware Update ------------------------------- > Blink BLUE LED until completed
*Success Indicator ------------------------------ > Solid GREEN for 5 seconds after operation
*Failure Indicator ------------------------------ > Solid RED for 5 seconds after operation
* These indicators are used to verify that the data from a sensor trigger, conguration change or rmware update
has been successfully or unsuccessfully communicated between the unit and cloud server/Skyhawk app.
While unit is ON and not being triggered a status LED will ash every 5 seconds:
Last transmission was successful --------------> Very fast GREEN blink (once)
Last transmission failed ------------------------ > Very fast RED blink (once)
Unit currently paused -------------------------- > Very fast BLUE blink (once)
14