User's Manual
Hub Shut-Down Operation:
When the Hub is not going to be used for more than a few weeks it should be powered down to conserve battery
life.
Step 1: Power OFF the Hub by pressing and holding the function button; release when RED LED starts blinking.
Unit will continue to power OFF by ashing the RED LED until process is completed.
Step 2: During the power down process (while the LED is blinking RED) the unit will send an alert to make sure
that the registered owner of the device is notied the Hub is going o-line.
Hub Reset Operation:
The Hub has the ability to be reset back to default settings.
Step 1: Press and HOLD the function button for more than 5 seconds.
Step 2: The LED will begin to rapidly blink RED, release button.
Press and Hold
Blinking RED
Release
Press and Hold
>5 seconds
Blinking RED
Release
11