User's Manual

Press and Hold

Blinking GREEN

Setup

SUCCESS

Hub Start-Up Operation:

Before moving forward with the unit operation you must download the Skyhawk CE app onto your smart device

and sign up for an account.

Step 1: Download and install the Skyhawk CE app from the Apple or Google Play store onto your compatible

smart device. Go to sky-hawk.com for more detailed information on which devices are supported.

Step 2: Power ON the Hub by pressing and holding the function button; release when GREEN LED starts blinking.

Unit will continue to power ON by blinking the GREEN LED for about 30 to 60 seconds.

Step 3: After unit nishes the power ON process, the GREEN LED will blink twice and the unit will automatically

send a power ON alert to the Skyhawk CE app via the cellular network. If the connection is unsuccessful, then the

Skyhawk CE will not acknowledge any communication and the LED will blink RED twice. Any communication

failure will place the unit into a timed retry mode, and after several retries it then will give up.

Two GREEN LED blinks

Step 4: The Hub now automatically goes into listening mode (very fast GREEN LED ash every 5s). Whenever

the Hub receives an RF signal from any of its supported Skyhawk Sensors, then the LED will blink GREEN twice

and relay this information to the Skyhawk app via the cellular network.

Setup

FAILURE

Release

Two RED LED blinks