Datasheet

SW TICHINGTHESMARTWAY
MS-390-4
Remarks
When mounted onto ferromagnetic parts
switching distance of
may reduce.
Electromagnetical influences and magnetic
fields may change the switching behaviour of
the sensor.
MS-390-4
Matching actuator MSM-390 available as well.
MS-390-4
Snap-fit Miniature Reed Sensor
Test coil 324TC-
Test programs
Test Procedure of final Reed Sensor Test Parameters
Material Information
AT range Test program
2 MS-390-4 2= -
3 MS-390-4 3= -
4 MS-390-4 4= -
Material
Colour
Housing PC black
Cable UL 1061, AWG 24, 4 mm stripped and tinned COM: black, NO: grey, NC: white
Potting compound Epoxy black
Test Coil placed in vertical position
Reed Sensor centered in Test Coil
Reed Sensor pushed into opposite corner
of Test Coil
PIC Proximity Instrumentation Controls
Kontaktbauelemente GmbH
Phone [phone]
Fax [phone]
Rev.:
ms3904_ds_e_1.0
Page 2 of 2 Nibelungenstr. 5 A
90530 Wendelstein, Germany
[e-mail]
www.pic-gmbh.com