Datasheet

SW TICHINGTHESMARTWAY
MS-225-3
Remarks
When mounted onto ferromagnetic parts
switching distance of
may reduce.
Electromagnetical influences and magnetic
fields may change the switching behaviour of
the sensor.
MS-225-3
Matching actuator MSM-225 available as well.
MS-225-3
Miniature Reed Sensor
M5 metal thread
Test coil 093TC-
Test programs
Test Procedure of final Reed Sensor Test Parameters
Material Information
AT range Test program
1 MS-225-3 1= -
2 MS-225-3 2= -
3 MS-225-3 3= -
Material
Colour
Housing Brass, Nickel plated
Cable UL 1061, AWG 28, 4 mm stripped and tinned black
Potting compound Epoxy black
Nuts Brass, Nickel plated, M5, separately packed
Test Coil placed in vertical position
Reed Sensor aligns with bottom line
Reed Sensor centered in Test Coil
Measured without nuts
PIC Proximity Instrumentation Controls
Kontaktbauelemente GmbH
Phone [phone]
Fax [phone]
Rev.: 2.2
ms2253_ds_e_2.2
Page 2 of 2 Nibelungenstr. 5 A
90530 Wendelstein, Germany
[e-mail]
www.pic-gmbh.com