Daim Ntawv Qhia Tus Neeg Siv

Contact SegenSolar (PTY) Ltd | Email: [e-mail] | Tel: [phone]
“Error 61 – BMS communication failed”
POSSIBLE CAUSES:
•
Incorrect/damaged BMS cable used – cable tester
• Incorrect DIP switches set on battery – Consult
documentation on product page
• Incorrect battery type selected – Program 05
• Incorrect port used on battery/inverter – User
manual on product page
NOTE:
•
OG range only uses RS485 with a Baud rate of
9600
• BMS cable included with battery/inverter or
bought from SegenSolar – Ask your account
manager or technical support advisor for
assistance
Troubleshooting – Most
common communication error