Daim Ntawv Qhia Tus Neeg Siv

Contact SegenSolar (PTY) Ltd | Email: [e-mail] | Tel: [phone]
ON/OFF Switch
Function Keys
Status Indicators
Function Keys
Setting LED
1,2 & 3
LCD Display
BMS communication Port
Long press to enter
programming menu
Settings
•
Enter programming mode
• Set 05 : Select PYL for Pylontech Batteries
• If there is parallel inverters, please select ‘USE’
on slave inverters
• Select suitable frequency in the 9th setting-set
to 50Hz.
• If you apply ‘SBU’ mode, except for the first
steps, the 11th setting, the maximum charge
current from grid should be set according to
battery numbers.
• The 12th setting, discharge voltage limit is
recommended to not be set below 46V.
• The 13th setting, charge voltage limit
recommended to be set at 53V.