Operation Manual

DT2010557-02
8.1 REPLACING THE FUSES
Electronic board fuse.
Unscrew the cartridge fuse or safety plug from the electronic board and
replace with a similar one.
Main circuit board fuse type: F6.3AL250V.
Fuse on the IEC power socket.
Draw out the fuse carrier and replace the fuse with the spare to be
found inside the small drawer.
Type: F6.3AH250V
Cartridge fuse/safety plug
Fuse carrier drawer
Fig. 76
Fig. 77
ASTM E1509 ......................................................................................Standard specication for room heaters, pellet fuel – burning type
UL 1482.............................................................................................Room heaters, solid fuel type
ULC S627 ..........................................................................................Canadian standards needed for pellet fuel stoves
UL 181...............................................................................................Factory made air ducts and connectots
UL 641...............................................................................................Low-temperature venting system, type L
ULC S609 ..........................................................................................Low-temperature vents, type L
Manufactured home and safety standard (HUD), cfr 3280, part 24 .....Mobile home installation
NFPA (Fire) 211 ..................................................................................Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances
REFERENCE STANDARDS
H07032120 / DT2002308 – 00
69
English
DT2032940-00
DT2030897-00
DT2010209-05