Operation Manual

SET CLOCK (current day/time)
Function Action Display
Set the day
Press the MENU key, select the SET CLOCK menu using the SELECT MENU
key, then conrm by pressing the SET key.
12:
:01
1
1
1
1
SET
C LOCK
DAY
MONDAY
HOURS
C LOCK
MINUTES
C LOCK
Conrm setting and
move to next section
Press the SELECT MENU key and set the “DAY”.
Conrm by pressing the SET key.
12:
:01
1
1
1
1
SET
C LOCK
DAY
MONDAY
HOURS
C LOCK
MINUTES
C LOCK
Set the hour
Press the SELECT MENU key and set the current “HOUR”. Conrm by
pressing the SET key.
Hours are expressed under the 24 hour format.
12:
:01
1
1
1
1
SET
C LOCK
DAY
MONDAY
HOURS
C LOCK
MINUTES
C LOCK
Set the minutes
Press the SELECT MENU key and set the “MINUTES”. Conrm by pressing
the SET key. After conrmation the initial display will reappear.
12:
:01
1
1
1
1
SET
C LOCK
DAY
MONDAY
HOURS
C LOCK
MINUTES
C LOCK
DT2040064-03
DT2011296-00
6.10 PROGRAMMING THE CLOCK
The stove leaves the factory with the clock already set. All that needs to be done, therefore, is to check that the time is precise or if any change is
needed because of summer time.
Correct time setting is necessary to be able to use all the functions where time is involved.
Setting the clock entails programming the following values: day, hour and minutes.
These values are displayed in sequence upon pressing the SELECTOR key.
H07032120 / DT2002308 – 00
39
English