Operation Manual

UNIT OF MEASUREMENT
Function Action Display
Selecting the UNIT OF
MEASUREM menu
Press the MENU button, use the MENU SELECTION button to select the
UNIT OF MEASUREM menu and the SET button to conrm.
UNIT OF
MEASUREM.
1
FUNCTION
ENABLED
1
UNIT OF
MEASUREM.
1
F
Selecting the unit
of temperature
measurement
Scroll with the MENU SELECTION button to nd the required unit of
temperature (F - Fahrenheit o C - Celsius) and conrm with the SET button.
UNIT OF
MEASUREM.
1
FUNCTION
ENABLED
1
UNIT OF
MEASUREM.
1
F
After conrmation the readout FUNCTION ENABLED appears on the
display, which then automatically returns to the initial readout.
UNIT OF
MEASUREM.
1
FUNCTION
ENABLED
1
UNIT OF
MEASUREM.
1
F
DT2040064-03
DT2011296-00
6.9 SETTING UNIT OF TEMPERATURE MEASUREMENT
This function allows the unit of temperature measurement in CELSIUS or in FAHRENHEIT to be set on the display.
These functions are activated by opening the front ap and pressing the following keys:
- the MENU key is used to access the main menu and return to the initial display at any time during programming to alter data that has been input incorrectly;
- the MENU SELECT key is used to scroll through the main menu and the submenus;
- the SET key is used to conrm a MENU or a selection;
- the ESC is used to return to the previous menu display at any time during programming to alter data that has been input incorrectly.
• Whenever the keyboard is not used for about 3 ½ minutes, the display goes dark to reduce consumption.
• In a blackout and therefore with no reception by the stove, the display goes dark after about 20 seconds.
H07032120 / DT2002308 – 00
38
English