Operation Manual

INTERRUPTION OF POWER SUPPLY

Action Description Display

If there is a blackout while the stove is in normal heating operation, there

are two possibilities of procedure according to stove set-up:

- blackout without timer thermostat settings.

- blackout with timer thermostat settings.

Blackout without timer thermostat settings.

When the electricity supply is restored, the appliance restarts automatically.

• The grate cleaning phase activates.

• The fan operates at full speed to allow the stove to cool.

• The automatic stove restart cycle starts (the steps detailed in the

‘STARTUP’ phase are repeated automatically).

• Once the ignition cycle has been completed the stove operates normally

at power level 2 with Multifuoco on 2 (Default settings: see the “POWER

OUTAGE” table to change the power level).

Blackout with timer thermostat settings.

There are 3 possible situations.

- Blackout straddling the time set for ignition: the stove does not restart.

- Blackout straddling the time set for shutdown: the stove restarts when

the electricity supply is restored.

- Blackout within the programmed operating time band: the stove restarts

when the electricity supply is restored.

Restarting is carried out with the same procedure as listed in “Blackout

without timer thermostat settings”.

CLEANING

12:0073F

DT2040061-05

H07032120 / DT2002308 – 00

English