Specifications

1.6 Manufacture Information
The units are assembled and tested in the United States by Piaggio Fast Forward.
Contacting us can be done through the following:
[e-mail]
Piaggio Fast Forward | 52 Roland Street | Boston, MA 02129
1.7 EU Restrictions
This product has been so constructed that the product complies with the requirement of
RED Article 10(2) as it can be operated in at least one Member State (Italy) as examined
and the product is compliant with Article 10(10) as it has no restrictions on putting into
service in all EU Member States.
1.8 Radar Safety
SAFETY WARNING: DO NOT OPEN OR ALTER the radar unit from original provide packaging
For safety, this device requires that users have 2.31 cm distance from the radome front
during normal operations.
The unit must be used in the intended manner outlined in Section 1 and in the environments
that are outlined in this section. The user can not change, open or alter the device or its
packaging to meet their product needs. This is a radar system that has been tested to
operate safely in its current packaging without alterations of any kind. Any changes to the
product package or operating range will deem the product to be unsafe for operation and not
compliant with any of the safety standards outlined above.
BLIS General Design Specification 000-101863 -Rev A Page 8 of 14
© 2022, Piaggio Fast Forward, Inc.