Datasheet

Features
Compatible
with
IoT LoRa Node pHAT
Description
IoT
LoRa Node
LoRa (Long Range) is the smart, long-range, wireless transmission technology that is enabling the future of
IoT (Internet of Things).
Our IoT LoRa Node pHAT allows you to create an inexpensive LoRa node, compatible with The Things
Network, in conjunction with a Raspberry Pi or other single board computers. This pHAT allows quicker
prototyping as it has the LoRa stack on the chip. Add sensors, buttons and more to complete your LoRa
network!
The IoT LoRa Node pHAT uses the RAKWireless RAK811 LoRa node module which is based on Semtech
SX1276 LoRa technology.
The board can be configured to use the different frequencies listed below:
• EU 863 - 870 MHz
• US 902 - 928 MHz
• AU 915 - 928 MHz
• AS 923 MHz
• IN 865 - 867MHz
• KR 920 MHz
• Uses RAK811 LoRa Radio with full LoRaWAN Stack embedded
• Communicates with the Raspberry Pi over UART only using a total of 3 GPIO
Pins for the module.
• Supports LoRaWAN Connections and LoRaP2P Modes.
• u.FL connector and antenna allowing different antennas to be used or
integrated into boxes with external antennas.
• Low power - uses less than 50mA During transmission
• Raspberry Pi A+
• Raspberry Pi B+
• Raspberry Pi 2B
• Raspberry Pi 3B
• Raspberry Pi 3B+
• Raspberry Pi Zero
• Raspberry Pi Zero W
• Plus any other
Raspberry Pi with 40
GPIO Pins