User Manual

2 Basic Orientation

Basic Orientation

LIFEPAK 20e Defibrillator/Monitor Operating Instructions 2-13

Changing Printer Paper

Loading 50 mm Paper

The printer is equipped with an out-of-paper sensor to protect the printhead. The sensor

automatically turns off the printer if paper runs out or if the printer door is open.

To load the paper:

1 Press the black button to open the printer door.

2 Remove

the empty paper roll.

3 Insert

the new paper roll, grid facing upward.

4 Pull out a short length of paper.

5 Push the printer door in to close.

Figure 2-15 illustrates the steps for loading 50 mm paper.

Figure 2-15 Printer

CAUTION!

Possible printer malfunction.

Using other manufacturers’ printer paper may cause the printer to function improperly and/or

damage the print head. Use only the printer paper specified in these operating instructions.