Manual

8-4

LIFEPAK 15 Monitor/Defibrillator Operating Instructions

Preparing the Monitor for Transmission

Before you can transmit using a wireless or direct connection, you must define transmission sites

and output ports in the LIFEPAK 15 monitor Setup mode.

For each transmission site, select an output port:

• For wireless transmission, set

OUTPUT PORT to BLUETOOTH WIRELESS.

• For a direct connection, set

OUTPUT PORT to DIRECT CONNECT.

• Set

OUTPUT PORT to BOTH if you normally transmit using a Bluetooth connection but you need a

direct cable backup. (If you set

OUTPUT PORT to BOTH, make sure the Bluetooth LED is not

illuminated before you attempt to transmit using a direct connection. The device will not

transmit using the direct connection when a wireless connection is available.)

For more information, see the LIFEPAK 15 Monitor/Defibrillator Setup Options provided with your

device.