Item Brochure

4 TrueCPR Device Instructions for Use
Using the TrueCPR Device
Using the TrueCPR Device
Performing CPR
To use the TrueCPR device:
1 Confirm patient is in cardiac arrest.
2 Remove the device from the carrying bag.
3 Separate the chest pad and back pad.
4Press the
(POWER) button to turn the device on. The calibration screen appears.
IMPORTANT! Do not press on the chest pad until calibration is complete and feedback screen
appears (approximately 3 seconds).
Back Pad
Item Description
1
Battery Readiness Indicator: Flashing LED on back pad handle indicates
battery capacity is sufficient for at least 25 minutes of operation.
Note: LED flashes approximately once every 4 seconds.
2
USB Port Cover: Provides access to USB port. Use a coin or similar tool
to open.
3
Battery Compartment: Holds two nonrechargeable Duracell
®
DL123
batteries. Use a coin or similar tool to open.
1
2
3