User's Manual

3D orientation

3D orientation of the sensor is calculated on-board during the measurement when in streaming

mode. The Matlab function to read the .BIN file has the option to output the quaternions and

Euler angles.

7. Troubleshoot

Reset

The reset is the manipulation which can be done if the Physilog® is not working properly. To do a

reset, hold the main button for 5 seconds. The LED blinks red/orange and then stops. If the

problem persists, fill out the contact form at the bottom of the support page

(www.gaitup.com/support) or write an email to: contact@gaitup.com. Please indicate Physilog®

serial number and describe the problem in as much detail as possible (number of red blinks, last

manipulation, firmware version etc.).

LED indications

Physilog 6S V1.1B user manual v0.0.2 Date: 08.12.2021