User's Manual

Mio SLICE User Guide 12
RESETTING MIO SLICE AND
PAIRING TO A NEW PHONE
1. Open the PAI app on the original phone. Navigate to the Settings tab and select Forget Device.
2. Open the phone’s Bluetooth settings and forget SLICE from the list of paired devices.
3. Factory reset the SLICE:
a. Make sure SLICE has more than 50% battery remaining
b. Place SLICE on the charger
c. When you see the charging screen, press down the button for 15 seconds. Keep the button pressed
down throughout the 5-second reset countdown.
d. The SLICE logo will be displayed when the factory reset is complete.
4. SLICE is now ready to pair with a new phone. Refer to Getting Started to activate and set up SLICE with
the new phone.
Performing a factory reset will erase all data on the SLICE and require you to reconfigure the settings.Note:
To connect Mio SLICE to another smartphone, a factory reset is required:
FIRMWARE UPDATES
Firmware updates provide new features and device improvements. When a new firmware is available for your
Mio SLICE, you will be notified in the Mio PAI app. You will also see the option to update your firmware in
the Settings tab of the PAI app.
Try the following tips if you have trouble updating your Mio SLICE:
1. Fully charge your SLICE.
2. Keep the PAI app open and do not navigate away from the app until the firmware update is complete.
3. Keep your SLICE as close as possible to the phone until the firmware update is complete.
4. Check that your phone has a stable internet connection.
MAINTAINING YOUR MIO SLICE
Mio SLICE contains a rechargeable lithium polymer battery. Follow these instructions and guidelines to
maintain the battery lifespan.
If you do not follow these guidelines, the battery life could be shortened and there is a risk of damage to
your SLICE, risk of fire, risk of electrolyte leaks and chemical burns, and risk of injury.
BATTERY