FAQ

Can I install Phyn Plus if I have a fire sprinkler system?
If you have a fire sprinkler system that is standalone and is on its own branch of pipes
(not integrated into the same pipes that deliver water to your fixtures) then Phyn Plus
can be installed as long as it is placed after where your sprinkler line branches off. Phyn
Plus should not be installed where it will interfere with your fire sprinkler operation.
Can I install Phyn Plus on my home if I have a well?
Absolutely! Phyn Plus has been installed on many homes with wells.
Does Phyn Plus monitor my irrigation system for leaks and
usage?
If your Phyn Plus device is able to be installed so that it is “before” your irrigation lines,
then your irrigation will be monitored for leaks and usage.
What is the diameter of the threaded ends on Phyn Plus?
Phyn Plus has 1” NPSM male threaded ends. When you purchase online, we include
connectors in the box: 3/4″ Water Meter Coupling Complete with Gasket, 1″ NPSM, 2-
1/2″ Length, 3/4″ NPT.
Does Phyn Plus tell me how much water is being used in my
home?
Yes, Phyn Plus shows your home’s water consumption monthly, daily, hourly and even
in real time. It also shows you how much water you use by fixture type (showers, sinks,
tubs, etc…).
What if I have a weak Wi-Fi signal where Phyn Plus will be
installed?
If your installation location is out of the range of your home’s Wi-Fi, Phyn Plus has a
universal antenna port located on the bottom of the unit. Any external antenna can be
plugged into this port to improve your Wi-Fi reception.

Summary of content (3 pages)