User's Manual Part 1

16
Press [MENU]. -The menu will appear.
Press [  ] and move to <Channel>, then press [OK].
-The <Channel> menu will appear.
Press [  ] to move to <Antenna>, then press [OK].
-The <Antenna> menu will appear.
Press [  ] to select Air or Cable.
Press [EXIT] to exit the menu.
1
2
3
4
5
Antenna Settings
Useful Tips
☛
AAnn aaiirr ssiiggnnaall iiss ttrraannssmmiitttteedd vviiaa VVHHFF//UUHHFF oovveerr tthhee aaiirr,, aannaalloogg iiss NNTTSSCC,, aanndd ddiiggiittaall
iiss AATTSSCC wwiitthh aa VVSSBB mmoodduullaatteedd ssiiggnnaall..
☛
A cable signal is a cable transmitted signal, analog is NTSC, and digital is SCTE
with
a QAM modulated signal.
Useful Tips
☛
TToo ccoonnffiirrmm tthhee aaddddeedd cchhaannnneell aafftteerr tthhee mmeennuu ddiissaappppeeaarrss,, pprreessss [[CCHHAANNNNEELL]]..
Adding or Removing Channels
After memorizing the channels, you may add more channels not added due to a weak signal, or you may remove unwanted channels.
Press the number of the channel to memorize, then press the
[ADD / DEL] button.
■
For example, to add a channel, press the number of the channel,
then press [ADD /
DEL].
■
When the [ADD / DEL] menu appears, press [OK] to either add or remove.
1
Adding or removing the current channel
Press [MENU]. -The menu will appear.
Press
[
 ]
to move to <Channel>, then press [OK] to finish.
-The <Channel> menu will appear.
Press [  ] to move to <Channel List>, then press [OK].
-The <Channel List> menu will appear.
Press
[
 ]
to move to the channel you wish to add and then
press the Red [ ] Button.
-If the channel has the mark, the channel is added.
-Press it again and the will disappear and the memorized
channel is removed.
Press the [EXIT] button to exit the menu.
1
2
3
4
5
Adding or removing all memorized channels