Installation & Assembly

5
If the valve is installed too far out of the wall,
the stems and nipples may be trimmed. To
determine amount to be cut measure the gap
between the escutcheon and the wall and/or
the gap between the handle and escutcheon.
If the valve is installed too deep behind the
wall, extension stems are available. Please
contact your local distributor to order part
number 2-289 6 1/2”
Secure handles using setscrews or 1/4-20
machine screws provided.
Remove handle, escutcheon and stem assembly, make appropriate cuts on stem and nipple.
Re - install stem assemblies, escutcheons and handles.
Once the finished wall is in place and the necessary installation finished, attach the
escutcheons and handles to the stem assemblies.
Proceed to the next step on how to fix trimming issues if applicable.
Your faucet is now ready to use.
Escutcheon
Handle
PART 4 (Escutcheons & Handles)
TRIM OUT
INSTALLED TOO DEEP
INSTALLED TOO FAR OUT
Escutcheon
Gap
FINISHED WALL