Installation & Assembly

Center to

Center 8”

NOTE: 1/2” NIPPLE NOT PROVIDED

NOTE: Check all connections for leaks and flush all lines.

Determine the proper location of the showerhead. Install a crossbeam and secure a 1/2” brass

90° elbow. Connect elbow to the valve using copper lines. Wall is ready to be closed.

Determine the proper location for the Tub spout. (NOTE: the outlet of the spout must be

minimum of 2” above the floodplane of the tub). Install a crossbeam and secure a 1/2” brass

90° elbow. Connect elbow to the valve using copper lines. Connect a 1/2” brass nipple to

elbow to accept the spout. Wall is ready to be closed.

Once finished wall is installed, attach Showerhead to the brass elbow. Slide flange agianst wall.

Once finished wall is installed, attach Wall Tub Spout to the brass nipple.

PROCEED TO PART 4 (Escutcheons & Handles)

90° Elbow

Center to Center 8”

Crossbeam

Showerhead

Flange

Nipple

90 ° Elbow

Finished wall

Crossbeam

Wall tub spout

PART 3A Tub Installation

PART 3B Wall Shower Installation