Installation Instructions

Assembly instructions (continued)
3. Assemble the socket assembly
□ Pull the excess power cord through the
base (I).
□ Screw the socket assembly (D) to top
of the upper pole (F).
□ NOTE: Please make sure the arm (D) and
socket face left as shown. if the arm and
socket are not face left, adjust the arm and
socket face left as shown and use the
wrench (J) (included) to tighten the nut
from bottom of the base (I).
B
C
F
D
I
4. Assemble the glass shade
□ Remove the socket ring (B)
from the socket by unscrewing
the socket ring (B).
□ Place the glass shade (C) over
the socket and secure with the
socket ring (B).
5
Socket