Installation Instructions

Assembly instructions (continued)

3. Assemble the base

□ Pull the excess power cord through the base (H).

□ Insert the nipples of lower poles (G) into holes

in base (H), and then secure with two metal

washers (I) and two nuts (J) from bottom of the

base (H), wrench (K) included.

4. Assemble the glass shades

□ Remove two socket rings (B) from

the sockets by unscrewing the socket

rings (B).

□ Place one glass shade (C) over each

socket, and then secure with a socket

ring (B) removed above.