Installation Instructions

Assembly instructions (continued)
3. Assemble the socket assembly
□ Pull the excess power cord through base (J).
□ Screw the socket assembly (E) to top of
the pole-1 (F).
4. Install the bulb
□ Prior to installing the bulb, inspect socket for
silica packet. If packet is present, then remove
and throw away. Do not expose it to children
or pets.
□ Install one 120V, 60HZ, 6-Watt Edison LED
bulb (B) (included) or one 120V, 60HZ,
100-Watt max, medium-base type A bulb
(not included) into the socket of the light lamp.
F
E
J
B
5