Installation Instructions

Assembly instructions
1. Unpack the lamp and assemble lower/middle/lower poles
2. Assemble the base & handle
□ Carefully organize and place all parts
on
a smooth, flat surface. line up all of the
parts according to the assembly
diagram.
□ Screw the upper pole (G) to bottom of
the socket assembly (E).
□ Screw the middle pole (H) to bottom of
the upper pole (G).
□ Screw the lower pole (I) to bottom of
the middle pole (H).
□ Pull the excess power cord through base (K).
□ Slide metal washer (J), base (K), metal
washer (J) and loader (L) over the nipple on
bottom of lower pole (I), then secure with
metal washer (J) and nut (M) from bottom of
loader (L), wrench (N) included.
NOTE: Make sure the spot on bottom of
swing arm assembly is opposite to the exit
of the power cord as shown.
□ Screw handle (F) to the swing arm as shown.
□ Swing the swing arm, if the swing arm is
hard to swing or have abnormal sound,
put a drop of wd-40 or similar product on the
joints and let it sit overnight. dry with a soft
cloth prior to assembly.
E
G
H
I
E
F
I
K
L
N
J
J
J
M
Nipple
Swing arm
Spot