Boat Remote User's Manual
Table Of Contents
- Safety Instructions
- FCC Requirements
- CHAPTER 1:Getting to Know Your Boat Remote
- CHAPTER 2: Installation
- CHAPTER 3: Programming
- CHAPTER 4: Operation
- CHAPTER 5: Troubleshooting
- APPENDIX A: Command Summary
- APPENDIX B: Proper Operation
- APPENDIX C: ENGINEERING SPECIFICATIONS
- APPENDIX D: Returning Your Unit for Repair
Chapter 3: Programming
45
Use the number keys.
Use the CODE key to insert a decimal point.
Press ENTER.
Using the number keys on the keypad enter the Low Limit. The
default is 11.0V and the range is 0-16 Volts. Use the CODE key to
insert a decimal point.
Use the number keys.
Use the CODE key to insert a decimal point.
Press ENTER.
Using the number keys on the keypad enter the Alarm Recognition
Time in minutes and seconds. The range is from 1 second to 999
minutes 59 seconds. The default is 5.0 minutes. Use the number
keys to enter the minutes and press ENTER. Then, repeat for seconds.