Mobile Phone User Manual Model Name: 101 Trademark: enspire 1
TABLE OF CONTENT 1. BASIC INFORMATION ............................. 5 1.1. BRIEF INTRODUCTION........................................... 5 2. BEFORE USE ............................................... 6 2.1. NAME AND EXPLANATION OF EACH PART ............. 6 2.1.1. Appearance Sketch Map ........................... 6 2.1.2. Description of the Standby Pictures .......... 6 2.1.3. Description of Keys .................................. 8 2.2. INSTALL SIM CARD AND MEMORY CARD ........... 10 2.2.1. SIM Card ....
.1. DIAL A CALL ....................................................... 13 3.2. REJECT A CALL ................................................... 13 3.3. RECEIVE A CALL ................................................. 14 3.4. END A CALL ........................................................ 14 3.5. EMERGENCY SERVICES ....................................... 14 3.6. EXTENSION SPEED DIAL ..................................... 14 3.7. DIALED CALLS/MISSED CALLS/RECEIVED CALLS/REJECTED CALLS ..................
.8. INTERNET ........................................................... 26 5. TEXT INPUT .............................................. 27 6. CARE AND MAINTENANCE.................. 28 7. FCC NOTE ..................................................
1. Basic Information 1.1. Brief Introduction Thanks for selecting enspire 101 mobile phone. Through reading the manual, you can fully know how to use 101 mobile phone, appreciate its complete function and simple operating method. 101 mobile phone is designed aiming at GSM/GPRS network environment; the phone is Two Card Two Standby, but you can`t call another SIM card when one SIM card is under phone call.
The company reserves the rights to revise the contents of the manual without prior notice. 2. Before Use 2.1. Name and Explanation of Each Part 2.1.1. Appearance Sketch Map The picture is only for your reference. 2.1.2. Description of the Standby Pictures Network signal strength The more the stripe is, the stronger the signal is. When SIM card 1s inserted in card slot 1, standby screen will show the icon.
Network signal strength The more the stripe is, the stronger the signal is. When SIM card 1s inserted in card slot 2, standby screen will show the icon. Battery strength The full the fill is, the more electric quantity is. Standby screen will show the icon. Normal mode When scene mode is set as normal mode, standby screen will show the icon.
2.1.3. Description of Keys Keys Function 1. Execute functions that the left-down/right-down corner indicator shows. Left soft key/ 2. In the standby mode, press Left Soft Right soft key key to access Menu, Right Soft key to access Contacts. Navigation key On other interfaces, it equals to navigation key and direction key except for special functions. Dial key 1. Press this key to dial or receive an incoming call. 2. When in the standby mode, press this key to access Dialed Calls.
3. End calls or reject incoming calls. Number key * Key # Key It is used to dial and input numbers or characters. Press and hold Number key 1 or 2 to get through the preset voice inbox. On the standby interface, input *; after inputting telephone number, if you want to input extension number, please press twice asterisk key, after the display screen shows “+”, please input your extension number. 1. In text editing interface, press "#" key to switch text the input method. 2.
2.2. Install SIM Card and Memory Card 2.2.1. SIM Card Before using the phone, you must insert valid SIM (Subscriber Identity Module) card in the phone. SIM card 1s provided by network supplier. When you subscribe to a cellular network, you will receive a plug-in SIM card complete with your subscription details, such as your PIN, and available optional services. Caution: Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water or dirt.
2.3. Battery 2.3.1. Install the Battery Take off the rear cover, of the mobile. Make one end of battery with metal surface aim at the battery connector. Then gently press the battery downward using the finger, and then press the other end to install the battery. Prompt: Please operate correctly to avoid damaging the battery connector. 2.3.2. Charging Insert the charger on the charging interface at the side end of the phone.
please make sure to use the designated charger. 2.4. Security Password PIN PIN (Personal Identification Number) is used to prevent your SIM card from being used illegally. PIN is usually provided with SIM card together. If you input wrong PIN for continuous three times, please input PUK to unlock it. Please contact with network operations company for more details.
When changing the locked PIN2, you need to input PUK2. If you input wrong PUK2 for continuous ten times, you can’t use the functions that need PIN2. Please contact with your service provider to buy new card. You can’t change PUK 2. If you lose the code, please contact with your service provider. 3. Quick User Guide 3.1. Dial a Call In standby mode, press numerical keys to input phone number to dial phone number. When you finish inputting phone number, press the dial key to make a call.
3.3. Receive a Call When an incoming call arrives, the phone will give out the corresponding prompt (such as vibration, ring tone, and etc.); if network support, the phone screen will show the name and telephone number of the caller; at this time, you can press Dial key to receive an incoming call. 3.4. End a Call After finishing a call, you can press End key to end a call. 3.5. Emergency Services You can directly dial an emergency service call without SIM card.
3.7. Dialed Calls/Missed Calls/Received Calls/Rejected Calls You can enter call log to check the relevant details of dialed calls, missed calls, received calls and rejected calls. Prompt: The record of incoming call from blacklist number will be saved in Rejected Calls. 3.8.
outgoing international calls when roaming), you can restrict the call under the corresponding conditions (need to apply to network operator for business). 3.11. Power off the Phone In the standby mode, press and hold End key to power off the phone. 3.12. T-flash Card Insert the T-Flash card into phone from the background. This will expand the Flash memory of the phone. Tap Multimedia menu, you can browse MP3, MP4, picture, video, photograph etc. 4. Function Menu 4.1.
The contacts are listed in the order of unnamed, special symbol, digit and English letter respectively (for Chinese names, the English letter corresponding to their pinyin prevails). 4.2. Message Message service is actually a network service. This menu works soundly depending on the type of your SIM card and the service provided by the network operator. Therefore, please check it before applying such function.
Save the received SMS Outbox Save the SMS not sent out successfully. Drafts Save the unsent messages. Sent box Save the SMS you sent successfully. Templates Directly use the default phrases when writing the messages. Settings: Set relevant parameters for the short messages, multimedia messages and push messages. Message capacity: Show the memory capacity of the messages. 4.3. Call logs Call logs Display your recent call log.
Display the list of your recent missed numbers. The operation is the same as the Dialed. Dialed calls Display the list of your recent dialed numbers. Received calls Display the list of your recent answered numbers. The operation is the same as the Dialed. Rejected calls Display the incoming call records in the blacklist. Delete all You could delete all the records of the Dialed, Received, Missed and Rejected.
received, Total sent, and Total received. Press left soft key to "Reset". 4.4. Settings You can customize the settings, such as time and date, language, call settings etc. Call settings Including: Dual-SIM: Including Standby mode, Reply by original SIM, Set SIM name, Set dual SIM call divert. Call divert: When “call divert” function is started up, you can transfer the incoming call to voice inbox or other phone number according to the tasked “call divert” conditions.
Auto record voice call. Phone settings Date & time: You can set up the date and time on the phone as well as their display mode. Language settings: You can select phone language. Shortcut settings: You can set the menu when you press navigation button to enter in standby interface. Auto Power on/off: You can set the time and repeat mode of power-on and power-off. Power saving mode: When setting pattern set to save electricity mode. And can view your battery power.
Keypad backlight time: Adjust the keypad backlight time. Security PIN: Start and close of PIN code and the modification of PIN. Modify PIN2: Modification of PIN2 code. Phone locked：Open or close the phone lock. The default password is “0000”. Modify the cellphone password: Change the phone and privacy password. Privacy: Set the privacy protection. The default password is “0000”. Auto keypad lock: Set the time of mobile phone automatically locked.
Network account: Manage internet account, and support editor and delete. GPRS Service: Choose turn on or off GPRS service. Data connection settings: Select to connect as needed or all the time. Network selection: Select to automatically or manually connect. 4.5. Multimedia Camera The device is equipped with a webcam with high pixels. You can take photo at any time and save the photo in the device or SIM card. Press OK key to get the picture.
Set as contact icon, Delete, Share, Rename, Slide play, Details. Audio This phone could play the MP3 stored in the phone memory and support the background play. Press the navigation key into the song list. Press OK to play or pause, press the navigation button to stop playing. Press up key and down key to adjust volume. FM radio You can listen to FM radio only when using a headphone. Enter the radio interface. Press the left and right navigation key to switch on a channel and a channel.
Games This mobile phone provides, pushing and snake two small game, please see the in-game help illustrate specific operation 4.6. Organizer Calendar You can use this feature to view the year, date and solar term easily. Use up/down/left/right direction key to navigator other date. Alarm You can edit alarm, time, ring and repeated ring mode. In “ alarm edit” mode, you can scroll up or down direction key, when the cursor goes to the desired option, press “OK”, then you can select desired settings.
4.7. Profiles The preset modes are Normal mode, Silent mode, Meeting mode, Indoor mode, Outdoor mode and Earphone mode. It support custom profiles, define at most 5 profiles, and users can set the parameters of the profiles. Instruction: The preset profiles do not support delete, while the custom profiles support delete. More Functions Choose one mode, to open the option menu: Rename: Rename the current mode. Ring settings: Set the SIM1/SIM2 call ring and message ring.
various WAP services, for instance, news, weather forecast and airlines etc. The services are specially designed for the device and are maintained by WAP service supplier. WAP service requires network backup. You can consult the network operator or service supplier about the availability, rates and tax of WAP services. 5.
Similarly, if the letter you want to input have the same key with the former letter, please wait until the cursor appears again, then input the new letter. For example, if you want to input “ok”, you need to press the “6” key three times continuously and get “o”, then press the key”5” twice, “ k” will appear on the screen. Press right soft key, you can delete the text you input. Number Enter “edit” mode, press “＃” key you can change the input way to “ number”.
·Unplug the charger from the electrical plug and the device when not in use. Do not leave fully a charged battery connected to a charger over a week, since overcharging may shorten its lifetime. ·Temperature tends to affect the limit of battery to be charged. Therefore, it is necessary for the battery to be cooled or warmed before it is charged. If the temperature of batter exceeds 40ºC ,the battery cannot be charged. ·Use the battery only for its intended purpose and avoid short-circuiting.
· Do not store the device in hot areas. High temperatures can shorten the life of electronic devices and warp or melt certain plastics. ·Do not attempt to open the device other than as instructed in this guide. Non-professional handling may damage the device. ·Do not use harsh chemicals or strong detergents to clean the device. ROHS Declaration Declaration of Conformity with the requirements of the e-waste Management Rules, 2011 (adopted by Notification S.O.
weight. 7. FCC NOTE This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
this standard during product certification for use at the ear is 0.622W/kg and when properly worn on the body is 0.756W/kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset.
