Operation Manual

45
 Speak directly into the SmartLink+. You will hear the
caller’s voice in both hearing instruments.
 SmartLink+ continues to relay incoming calls to the hearing
instruments as long as the Bluetooth sign is visible on the
SmartLink+’s display (even if SmartLink+ is switched OFF).
Ensure that your hearing instrument’s FM receivers are
permanently attached and switched ON.
Users of hearing instruments without analog remote
control functionality must ensure their hearing instruments
are switched to an FM program in order to hear the
ringing tone of an incoming call.
Making a call
The SmartLink+ must be switched ON and connected to the
mobile phone in order to make calls – see page 43.
 Enter or select a number to call on the mobile phone, press
on the SmartLink+ for voice dialing, or press
and
F
to dial the last-used phone number.
 The mobile phone’s voice dialing feature can also be used if
available. Refer to the mobile phone’s instructions.
SmartLink+ automatically switches remote-controllable
Phonak hearing instruments to the “FM + M” program.